2026265-075C Solar 8000M/i patient monitor 3-7
Installation: Front panel connectors and indicators
Front panel connectors and indicators
The front panel connectors consist of four M-Ports. The Solar 8000M also
has a keypad connector. Each port has a LED indicator.
M-Ports
M-Port means multi-protocol and supports Ethernet 10BaseT, RS-232, 1
wire identification, and is MIB (Medical Information Bus) compliant.
M-Ports support AutoPort devices, but an AutoPort to M-Port adapter,
PN 2001973-001, is required. The adapter must connect to the AutoPort
device, not the M-Port host (the Solar 8000M/i patient monitor).
The following devices connect directly to the M-Ports. The connector is an
8-pin RJ-45 type.
Solar 8000M/i remote control
Solar 8000M/i keypad
PRN 50-M digital writer
RM-M respiratory mechanics module
Remote Alarm Terminal (Nurse Call and Alarm Light System)
Laser printer (requires a serial port on the printer and an interface
adapter to connect to the monitor)
Unity Network ID connectivity device
M-Port LED indicators Power LED indicator
015A
015B
Solar 8000M
M-Port connectors
Solar 8000i
Keypad connector
To Next Page
Loading...
