A-24 Solar 8000M/i patient monitor 2026265-075C
Appendix A – Technical specifications: Solar 8000M/i display
Required specifications for non-medical grade CRT displays
The following are required specifications:
Electrical:
Horizontal: Sync Rate: 48.4 KHz (*see note)
Sync Input: TTL negative
Vertical: Refresh Rate: 60 Hz (*see note)
Sync Input: TTL negative
Video: Non-composite: 0.7Vp-p analog RGB
Polarity: Black-negative
Resolution: 1024 x 768
Input Impedance: 75 ohms
NOTE
Multiscan displays indicate the sync rate and the refresh rate as
ranges (e.g., 20 KHz to 80 KHz), rather than a single value. To meet
the required specifications, ensure that the ranges indicated on your
display include a 48.4 KHz horizontal sync rate and a 60 Hz vertical
refresh rate.
Monitor (Display) Connections:
Captive cable, or interconnect cable (processor unit to display):
15 pin (3 row) Dsub male connector, standard VGA pinout
Connector(s): 15 pin (3 row) Dsub female connector, standard VGA pinout; or 5
BNC connectors
Emissions: CISPR 22
Agency Approvals: IEC 60950-1, UL 60950-1, CAN/CSA-C22.2 No. 60950-00, CE
See “Non-medical grade displays” on page A-23.
To Next Page
Loading...
