GE Solar 8000M/i - Get Error Logs; Get Logs Via PC Using Netupdate

2026265-075C Solar 8000M/i patient monitor 5-27
Troubleshooting: Get error logs
Get error logs
Get logs via PC using netUpdate
These instructions describe how to copy log files from a Solar 8000M/i
patient monitor to a PC using one of the following configurations:
 PC or PC laptop connected to a Solar 8000M/i patient monitor
 PC or PC laptop connected to the Unity Network MC network.
CAUTION
LOSS OF MONITORING — There may be a temporary
loss of monitoring functions until the log file retrieval is
complete. Do not copy logs while a patient monitor is
connected to a patient. Medical staff should be prepared
to cover patients in need during these periods of lost
monitoring functions.
Requirements
PC to patient monitor PC to Unity Network MC network
 One patient monitor software CD-ROM V5 or later.
NOTE
The netUpdate tool is only available on a software CD-ROM.
 Microsoft
®
Windows
®
XP, 2000 or NT
™
operating system
 CD-ROM drive
 Network card
Category 5 crossover patch cable
(pn 415480-001)
Category 5 network patch cable
(pn 408997-001)
NOTE
 You must be able to change the IP address on the PC.
 If you are using a PC laptop with a docking station, remove the laptop from the docking
station before you begin the log transfer.
 If you are using a PC with a wireless network connection, remove or disable the
wireless network card before you begin the log transfer.