GE Transport PT878 - Page 88

August 2008
5-12 Data Logging
The Start All Logs Option Use the Start All Logs option to restart all logs that have been paused:
1. At the Log Manager window (see Figure 5-2 on page 5-2), press
[MENU] and then [ENTER].
2. Press the [X] key to highlight the Log menu and press [ENTER].
3. In the Log menu, scroll to the Start All Logs option and press
[ENTER].
The PT878 returns to the Log Manager window, which now shows all
active logs as Pending or Running in their status line.
The End All Logs Option Use the End All Logs option to permanently stop all logs that are
currently pending or running:
1. At the Log Manager window (see Figure 5-2 on page 5-2), press
[MENU] and then [ENTER].
2. Press the [X] key to highlight the Log menu and press [ENTER].
3. In the Log menu, scroll to the End All Logs option and press
[ENTER].
The PT878 returns to the Log Manager window, which now shows all
active logs as Finished in their status line.
The View All Sites Option Use the View All Sites option to examine all logs that are associated
with sites other than the current site:
1. At the Log Manager window (see Figure 5-2 on page 5-2), press
[MENU] and then [ENTER].
2. Press the [X] key to highlight the Log menu and press [ENTER].
3. In the Log menu, scroll to the View All Sites option and press
[ENTER].
The PT878 returns to the Log Manager window, which now lists all
the logs for all sites.