How to resolve Temperature Input Supply issues in GE Transport PT878 Measuring Instruments?
If you are experiencing issues with the Temperature Input Supply on your GE Measuring Instruments, which indicates that the supply temperature input is out of range, check the cable and transmitter for any faults.
How to resolve Temperature Input Return issues in GE Transport PT878?
If you're having trouble with the Temperature Input Return on your GE Measuring Instruments, indicating the return temperature input is out of range, inspect the cable and transmitter for any issues.
What to do if GE Transport PT878 Measuring Instruments have Wetted Transducer Leaks?
Repair wetted transducer leaks in GE Measuring Instruments as you would with any other leak. If the leaking fluid is corrosive, inspect the transducer and cables for damage.
General| Type | Ultrasonic Flow Meter |
|---|---|
| Wetted Materials | Not applicable (non-intrusive) |
| Protection Rating | IP65 |
| Measurement Principle | Transit-Time Ultrasonic |
| Measurement Range | 0.1 to 12 m/s (0.3 to 40 ft/s) |
| Accuracy | ±1% of reading |
| Display | LCD |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Operating Temperature | -20 to 60°C (-4 to 140°F) |
| Pipe Size Range | 0.5 inch (13 mm) to 48 inches (1220 mm), depending on transducer |
| Fluid Types | Liquids |
| Outputs | 4-20 mA |
| Process Connection | Clamp-on |
To Next Page
