Measurement and Analysis
Vivid S5/Vivid S6 User Manual 297
R2424458-100 Rev. 2
Figure 7-28: EF Results Screen
Figure 7-29: EF Results Screen - Alternative dual screen mode
EF Results screen
When processing is complete the screen is generated
(Figure 7-28).
Note: The bi-plane results (BiP) will only appear on screen
(Figure 7-28) after measuring both 2-Ch and 4-Ch views.
The AutoEF pro-
cessed image runs
slower than the
original loop- speed.
In order to see the
loop in correct play-
back speed exit au-
toEF.
The running loop is shown on the left. A green dotted line
marks the inner border of the chamber. In case of poor
tracking, the system will automatically display parts of the
border in red.
The system will automatically pick the frames with the maximal
area (ED) and minimal area (ES) and place them on the right
area of the display.
To Next Page
Loading...
