Geely CK MR479QA 2007 User Manual

332
9 Remove the snap ring under the seat cushion. Open the front seat cushion cover. Remove the inner
coversnap ring. Remove the seat cushion cover.
2. Installation
1 Install snap ring at the front and rear seat. Be careful not to foul the cover or get it wrinkled;
2 Install the snap ring at the front of the seat back. Install the front seat headrest support;
3 Install the adjuster and track assembly with bolts;
4 Install the coupling plastic gasket. Install the seat back assembly to the seat cushion with bolts and nuts.
Install the snap ring to the rear seat back;
5 Install the adjuster hinge cover with 2 screws;
Remove the Headrest and Bracket
Remove the Front Seat Adjuster Hinge Cover
Remove the Seatback Snap Ring and Set Bolt
Track Assembly
Adjuster Assembly
Remove the Track and Adjuster Assembly
Remove the Headrest Support
Remove the Seatback Cover
Remove bolts
Non-LOCK

Geely CK MR479QA 2007 Specifications

General

Brand	Geely
Model	CK MR479QA 2007
Category	Automobile
Language	English