gefran VDI100 Series User Manual

08-35=1-2: When the temperature is getting higher for the motor and AI2 voltage level is higher than the value
of 08-44, the display will show “OH4 Motor Overheating” and the motor will stop by 08-35=1-2.
08-35=3: When the temperature is getting higher for the motor and AI2 voltage level is higher than the value of
08-44, the display will show “OH3 Motor Temp Warning” but the motor continues running. But AI2 voltage level
is higher than the value of 08-42 and the time reach to 08-39, the motor free runs to stop.
08-35=1-2-3: When the motor cools down and AI2 voltage level is lower the value of 08-43, “OH4 Motor
overheat” will reset.
Note: The resistor (PTC) conform the British Standards Institution:
When Tr is 150 °C in Class F and is 180°C in Class H°
Tr- 5°CRT≤ 550Ω, put the value of RT in formula (1), the V value by calculation is the value of 08-43.
Tr+ 5°CRT≤1330Ω, put the value of RT in formula (1), the V value by calculation is the value of 08-44.
It gets reference value by using formula (1) even in the different spec of resistor (PTC).
( )
200//
200//
10
2
1
PTC
PTC
RR
R
V
+
××=
( )
200//
200//
10
2
1
PTC
PTC
RR
R
V
+
××=
Formula (1)
Pic4.3.65(a)PTCThermistorCharacteristics(b)PTCThermistorConnections
1330
550
Resistance
(ohms)
Temperature
Cl as s F
150° C
Cl as s H
180° C
Tr'
Tr - 5
Tr
Tr + 5
Tr：Temperature threshold
value
(a) PTC Thermistor
Characteristics
(b) PTC Thermistor
Connections
分壓電阻R
PTC熱敏電阻
＋
10V
AI 2
GND
內部線路
200KΩ
210 VDI100 • Instruction manual

gefran VDI100 Series Specifications

General

Brand	gefran
Model	VDI100 Series
Category	Inverter
Language	English