○○○○○○○○○○○○○○○○○○○○○○○
Get started 13
Demo
How to listen to the Demo Styles
At any moment you can listen to the automatic playback of your WK2 to get an idea of what
the instrument is capable of doing.
1. Press the DEMO button.
2. Select one of the first 8 buttons under the display (F1…F8).
Each button corresponds to a Demo Song. Press button F9 to listen to all the Demo
Songs chained into a medley.
The Demo Song starts to play.
3. To stop the Demo Song, press the same Function button, or the DEMO to escape Demo mode.
SONG PLAY - DIRECT FROM DISK
WK2 can play a Song in GMX, WK2, PK7, WK3, CD or Standard MIDI File [SMF] format
directly from disk, without loading the data to memory beforehand.
Have a WK2, PK7, WK3, CD or SMF format Song disk ready.
1. Insert the disk into the disk drive.
Refer to the section “General Disk handling information” in the Disk chapter for informa-
tion regarding the precautions to take when inserting and extracting floppy disks from
the drive.
2. Press the DISK button.
The DISK icon illuminates and the arrowhead to the right of the display points to the
LOAD function in the list of the DISK functions.
The display shows the first available file type and relative extension contained in the
disk.
3. Rotate the DIAL (or use the +/– buttons) to scroll through all the files present on disk, until the
display shows the file that you want to listen to.
4. Press PLAY/STOP or START/STOP to start the playback directly from disk.
The message “Wait!!” appears for a few seconds then playback begins.
5. To stop the “direct” playback at any time, press STOP or START/STOP.
NewYork
○○○○○○○○○○○○○○○○○○○○○○○
Note 1: It is possible to abort the Direct play function dur-
○○○○○○○○○○○○○○○○○○○○○○○
ing the “WAIT!” period by pressing ESCAPE.
○○○○○○○○○○○○○○○○○○○○○○○
Note 2: how to load Songs into memory is discussed in the
○○○○○○○○○○○○○○○○○○○○○○○
“Disk 1 Hard Disk” chapter.
To Next Page
Loading...
Need help?
General
