○○○○○○○○○○○○○○○○○○○○○○○
Sounds & Performances 29
3. Change the Performance name using the keys of the keyboard.
4. hold down the STORE PERFORMANCE button for a few seconds until the display shows the
question mark “?” next to the Performance name.
5. Press ENTER to confirm the operation and save the Performance with the new name.
TO RESTORE THE ORIGINAL PERFORMANCE SETTINGS
The INIT function (see MIDI/GENERAL) cancels all modifications applied to the Perform-
ances and restores the original factory settings (ROM).
1. Press the Cursor [ ] and [ ] buttons as many times as necessary until the arrowhead is next
to the MIDI/GENERAL menu function.
2. Press the PAGE [
] and [ ] buttons as many time as necessary until the INIT page is reached.
3. Rotate the DIAL or use the +/– buttons of the right hand selection keypad to select the element
to restore.
- INIT ALL cancels all programmed data contained in RAM.
- INIT PFM cancels all programmed Performances in RAM.
- INIT SEQ cancels all sequence data.
- INIT SMP cancels all samples.
4. Press ENTER to confirm and automatically restore the original settings.
To Next Page
Loading...
Need help?
General
