The Delete function allows the cancellation of a single file from a floppy disk or Hard Disk
partition.
DISK
1. Insert a the floppy disk that contains the file to erase into the drive.
2. Press the FLOPPY DISK button then move the right display arrowhead next to the DELETE disk
menu function with the cursor buttons.
3. Rotate the DIAL until the name of the file you wish to cancel is displayed.
4. Press ENTER twice to cancel the file.
After a short period, the file on disk is cancelled.
HARD DISK
1. Press the H DISK button and rotate the DIAL until the partition you wish to work on is displayed.
2. Press ENTER.
3. Move the right display arrowhead next to the DELETE disk menu function with the cursor but-
tons.
4. Rotate the DIAL until the name of the file you wish to cancel is displayed.
5. Press ENTER twice to cancel the file.
To Next Page
Loading...
Need help?
General
