EasyManuals Logo

GEM WK2 User Manual

GEM WK2
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
22 Owner’s Manual
• 3 Sounds & Performances
48 6I 0I
------------------------------- FULL KEYBOARD ---------------------------
(Upper 1, Upper 2)
SPLIT KEYBOARD
--------- Lower -------- ------------------ Upper 1 &/or Upper 2 -------------
THE SOUNDS AND TRACKS
A Sound is assigned to each track of a Performance.
THE 3 REAL TIME KEYBOARD TRACKS (UPPER 1, UPPER 2, LOWER)
At all times the display shows the tracks of both the accompaniment sections as well as the
keyboard sections (unless the instrument is set to a mode which deactivates one or more
tracks).
The Real Time keyboard sections correspond to the Upper 1, Upper 2 and Lower tracks
(tracks 9, 8 and 7 respectively).
SOUNDS & THE KEYBOARD MODE
The keyboard sounds can be configured in several different ways by means of the key-
board activators LOWER, UPPER 2, UPPER 1 located to the right of the display.
Each button has its own On/Off LED indicator.
The configuration of these three keyboard activators also determines the keyboard mode:
FULL and SPLIT.
FULL MODE
Full Mode is operative when the Upper 1 and/or Upper 2 keyboard sections are active to
play over the whole keyboard range with the Lower section disabled. In this case, you will
be able to play either with a single Sound or with two layered Sounds, across the entire
keyboard range.
If, therefore, you wish to play in Full mode, simply cancel the LOWER keyboard activator as
well as the ARRANGE ON/OFF button.
This action automatically assigns one or both Upper sections to the entire keyboard exten-
sion and cancels the split (if ARRANGE ON/OFF is off).
When you play with Styles (the ARRANGE ON/OFF button selected), the accompaniment
tracks recognise the current Split Point; the keyboard zone to the left of this point is corre-
sponds to the LOWER section.
If the LOWER section is off, (LED off), the lower keyboard is disconnected for the assigned
keyboard sound and does not play.
The UPPER 1 and UPPER 2 sections can be activated/deactivated at will to introduce or
cancel the keyboard sounds as required.
SPLIT MODE
Split Mode corresponds to the situation when the keyboard is divided into two parts, allow-
ing you to play two (or three) different sounds simultaneously: one on the left (Lower) and
one (or two) on the right (Upper 1 and/or Upper 2).
When you play in real time, you can activate Split Mode simply by pressing the LOWER
button (LED on). This splits the keyboard and assigns the Lower sound to the left keyboard
area and the Upper sounds to the right. This configuration becomes standard for the instru-
ment until changed again.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GEM WK2 and is the answer not in the manual?

GEM WK2 Specifications

General IconGeneral
DisplayLCD
EffectsReverb, Chorus
MIDIIn, Out
Presets32
ConnectionsHeadphone, MIDI In/Out, Pedal

Related product manuals