○○○○○○○○○○○○○
Disk & Hard Disk 51
HARD DISK PARTITION FORMATTING PROCEDURE
This operation allows you to cancel all data contained in a partition and, as a result, elimi-
nate the partition from the HD directory.
1. Press HARD DISK and rotate the DIAL to select the desired partition.
2 Press ENTER.
3 Move the right display arrows next to the FORMAT menu function with the cursor buttons.
The display shows the message “DelPart?” as a request of confirmation of the format-
ting process.
4 Press ENTER to confirm the request then press ENTER once again to complete the operation.
CREATING A NEW PARTITION (NEW PART)
On the right hand selection keypad, the button “+100/NEW” allows you to create a new
partition when you are working with the Hard disk.
1. Press the HARD DISK button.
2. Press the “+100/NEW” button.
The display requests confirmation with the message: “New Part?”.
3. Confirm with ENTER.
4. At this point, you can insert a name for the new partition.
Use the keyboard to write the name. Up to 8 characters can be used.
5. Press ENTER.
The display requests confirmation of the operation with the message: “SURE ? “.
6. Press ENTER again.
After a short instant, the new Hard Disk partition will be created.
Part.01
To Next Page
Loading...
