Generic TR 125 Service Manual

- 30 -
Rear suspension
Compress upward and downward the rear shock absorber to
check its actuator.
Check if components on the rear shock absorber are loosened
or injured.
Lift and support the rear wheel and swing the wheel to check if
engine suspension bushing is loosened.
Bolt/Nut/Fastening Part
Inspect bolts, nuts and fastening parts at every part of the motorcycle for looseness.
If it is loose, tighten it to specified torque.
Wheel Rim/Tyre
Check if there is crack, nails and similar sharp objects, and
other injuries on the tyres.
Inspect pneumatic pressure of tyres.
* Attention
Measure cold inflation tyre pressure
Specified air pressure Unit: Kpa
Tyre specifications Tyre pressure
QJ125GY-16A
Front tyre
100/80-17 225±10kpa
Rear tyre
130/80-17 225±10kpa
Pressure up
and down

Generic TR 125 Specifications

General

Brand	Generic
Model	TR 125
Category	Motorcycle
Language	English