- 42 -
II Vehicle Housing
Disassemble body as the following order:
rearview mirror →front pod →instrument support →instrument →back pod
→front splash guard →seat cushion →decorating plate of left and right front back
plate →left and right front back plate→ front and back junction plate of right and
left back plate→ bottom cover→ left and right back plate of oil tank → right and
left back guard board →right and left step tread →taillight→ back splash plate →
back license tag support
* Attention
Do not damage exterior parts during assembly and disassembly.
Do not damage the jaws on the exterior parts of the vehicle during assembly or disassembly.
Align built-in panel and cover plate to their grooves respectively.
Correctly install paw of each part during combination.
Do not damage the fittings during exterior part installation.
To Next Page
Loading...
Need help?
General
