- 82 -
VIII Bulbs/Switches/Instruments
Preparatory data-------------------------------------------------------8.1
Fault Diagnosis -------------------------------------------------------8.2
Headlamp Bulb Replacement --------------------------------------8.3
Front Turn Signal Lamp Bulb Replacement ---------------------8.4
Taillight/license plate lamp/rear turn-lamp bulb replacement--8.5
Instrument ------------------------------------------------------------8.6
Master switch---------------------------------------------------------8.7
Horn--------------------------------------------------------------------8.8
Handle switch--------------------------------------------------------8.9
8.1 Preparatory Data
Precautions on operation
Remove switches from the motorcycle and perform continuity test.
8.2 Fault Diagnosis
“ON” lamp of Ignition switch is not on.
• Bulb burnt.
• Defective switch.
• Poor contact of connector or broken wire.