- 35 -
Under the brake fluid before pump installation bolt 22-34N·m
Liquid brake oil pump before installation bolt 5-10N·m
Front wheel spindle 100-113N·m
Front wheel head bolt 5-10N·m
The brake disc retaining bolt 5-10N·m
Liquid brake pump installation after the bolt 22-34N·m
Back oil pump installing bolts liquid brake 5-10N·m
Back wheel spindle 100-113N·m
1.2 Fault diagnosis
1.2.1Brake in ill performing services
z Brake without adjustment well
z Abrasive wear of brake shoe units and liquid brake plate
z Improper installment of brake shoe units
z Pollution of liquid brake plate of brake shoe units
1.2.2 Brake reaction slowly or handle is tight
z Brake without adjustment well
z Abrasive wear of brake shoe units and liquid brake plate
Improper installment of brake shoe units
1.2.2 Brake with abnormal sound
z Abrasive wear of brake shoe units and liquid brake plate
z Pollution of liquid brake plate of brake shoe units
1.2.4 Braking handle/footstep is soft or light
z Air in hydraulic system
z Leakage of hydraulic system
z Braking footstep/plate is dirty
z Sealing abrasive wear of caliper piston
z Abrasive wear of braking footstep/plate
z Caliper is dirty
z Caliper can not slide well
z Lack of brake fluid
z Block of brake fluid pipe
z Bending/incompletion of caliper piston
z Bending/incompletion of master cylinder piston
z Master cylinder piston is dirty
z Braking handle/footstep is curving
1.2.5 Brake gets stuck or is pulled to one side
z Braking footstep/plate is dirty
To Next Page
Loading...
