- 93 -
X Cooling system
Preparatory data---------------------------10.1
Fault diagnosis-----------------------------10.2
Water pump---------------------------------10.3
10.1 Preparatory data
Functions of cooling system:
It can build some channels which can allow liquid circulation inside the cylinder and the inner wall of the
cylinder cover; a special radiator is set outside the engine body so that the forced circulation of cooling
water can be made through water pump and pipeline, and then the heat of the engine can be released to cool
it through air blowing the surface of the cooling fin of the radiator at high speed.
10.2 Fault diagnosis
Water leakage
Seal ring damaged
Pimp body broken
Water pipe breakage
Over-high temperature of cylinder body
Water pump impeller damaged
Radiator fan broken
Lack of cooling liquid
Temperature sensor damaged
To Next Page
Loading...
Need help?
General
