Printing Using the Optional Document Feeder
61
2
D
DD
D
Set your originals face up into the document feeder.
Note
❒ When you use the optional document feeder, the originals are fed from the
bottom of the stack. Make sure that the originals are set in the correct se-
quence with the first original on the bottom.
E
EE
E
Press the {
{{
{Master Making}
}}
} key.
F
FF
F
Check the image position of the trial or proof print.
Note
❒ If the image position is not correct, adjust it using the {
{{
{Image Position}
}}
} keys
(see ⇒ p.21 “Shifting the Print Image Position Forward or Backward”) or
the side tray fine adjusting dial (see ⇒ p.21 “Shifting the Print Image Posi-
tion to the Right or Left”).
TSLH013E