GF CMD User Manual

87 pages

To Next Page

To Previous Page

CMD

Then connect the probe and probe holder using short connection cable. The

connection between the probe and the control unit is provided via Bluetooth

communication. See the chapter Using Bluetooth adapter for remote control.

Table of Contents3
Introduction6
Control Unit7
Power Supply8
Battery Charging8
Battery Exchange8
Switching the Instrument On/Off9
Display & Keys10
Display Backlight10
Display Contrast10
Menu Handling10
Text Input11
Choice from List of Items11
Input of Numerical Values12
GPS Receiver Connection13
RS232 Connection13
Bluetooth Connection13
Probe15
Assembling the Measuring Apparatus15
Probe CMD-Tiny15
Probe CMD-1 and CMD-Miniexplorer18
Probes CMD-2 and CMD-420
Probe CMD-4/623
Probe CMD-Duo26
Starting up the Instrument27
Battery Charging29
Power Supply29
Battery Exchange30
Probe CMD-Explorer31
Using Bluetooth Adapter for Remote Control34
Power Supply34
Battery Charging35
Battery Exchange36
Assembling the Bluetooth Adapter and the Probe36
Measurement37
Calibrations & Depth38
Measurement Time & Speed of Movement in the Field40
CMD-Duo Measuring Time40
Measurement Error41
Measured Value Screens42
Manual Measurement45
Starting Measurement45
Measuring Position46
Checking and Saving Data48
Continuous Measurement49
Start of Measurement49
Start of the Measurement50
Measurement between Length Marks52
Finishing of the Line Measurement53
Manual Measurement with Gps54
Start of Measurement54
Checking and Saving Measurement56
Continuous Measurement with Gps57
Start of Measurement57
The Current Measurement59
Quick Search Measurement60
Start of Measurement60
File Tools62
Visualization of Measured Data62
Deleting of a File62
Saving Stored Files into USB-Flash Disk63
Creating New Calibration65
Remeasure any Calibration Point67
Changing Conductivity Values67
Deleting the Calibration68
Data Download69
Software Installation69
The Downloading Software Introduction69
Choosing Proper Version of Binary File70
Download of Measured Files71
Exporting Data to Interpretation Programs72
Exported File Types74
Firmware Upgrade79
Combining Newer - Older Control Unit and Probe81
Technical Specification82
Control Unit82
Standard Control Unit Accessories83
Probe84
Standard Probe Accessories86
Optional Accessories86
Store and Transport87
Service Information87

Questions and Answers:

Need help?

Do you have a question about the GF CMD and is the answer not in the manual?

GF CMD Specifications

General

Brand	GF
Model	CMD
Category	Measuring Instruments
Language	English

Related product manuals

GF CMD User Manual

Table of Contents

Questions and Answers:

GF CMD Specifications

Related product manuals