GF CMD - Instrument Power On;Off

9
CMD
Switching the instrument on/off
The instrument is switched on by “Power” key. Then the following screen is
shown.
The information shows number of measured files, remaining free memory
and serial numbers of probe and control nit.
The instrument can be switched off by “No” key from the Main Menu.
GF Instruments
Conductivity Meter CMD
Probe:
SN-probe:
SN-unit:
Meas. error:
CMD-4 (3.0 / 6.0m)
#07070002 v1.0
#07070003 v1.1
Number of files:
Free memory:
2
131072 kB
C U