GF CMD User Manual

55
CMD
The next screen will appear:
Go to the measured point and press the button on the probe or “Yes“ key for
start of the measurement.
The functions of keys are following:
- Yes / button on the probe – start of the measurement.
- No – terminates of the measurement of the current file.
- 0 to 9 or - – opens window for comment and allows entering note for a
measured point.
- F-key + 1 to 6 – switch over the measured value screens. See chapter
Measured value screens.
- F-key + Up / Down / Left / Right – changes scales of histograms or scale
and orientation of the displayed map if it is displayed. See chapter
Measured value screens.
Latitude:
Longitude:
Conduct.:
In-phase:
Meas. error:
48 05.333N
011 39.359E
Start measurement?
C U

GF CMD Specifications

General

Brand	GF
Model	CMD
Category	Measuring Instruments
Language	English