GF CMD User Manual

58
User manual
The next screen will be shown.
Go to the starting point and press the “Yes“ key for the start of the
measurement.
The functions of keys are following:
- Yes – start of measurement.
- No – terminates the measurement of the current file.
- 0 to 9 or - – opens the window for comment and allows entering note for
measured point. Measuring is suspended during note editing.
- F-key + 1 to 6 – switch over the measured value screens. See chapter
Measured value screens.
- F-key + Up / Down / Left / Right – changes scales of histograms or scale
and orientation of the displayed map if it is displayed. See chapter
Measured value screens.
Latitude:
Longitude:
Point no.:
Conduct.:
In-phase:
48 05.333N
011 39.359E
Start measurement?
C U

GF CMD Specifications

General

Brand	GF
Model	CMD
Category	Measuring Instruments
Language	English