GFA DC 8010 - 2.6 Radio and pull switch functions

35
2.6 Radio and pull switch functions
Use this menu item to select how the door responds to a
command from the radio or pull switch button.
To use this option, a radio or pull switch button must be
connected to terminals X7.
If you activate option
.3 and automatic closing 2.3, the door
closes after the time set in
2.3 when you press the pushbutton.
2.6
Radio and pull switch functions
► . 1
ActivationinnallimitpositionOPENorintermediateopen:doormovesin
nallimitpositionCLOSE
ActivationinnallimitpositionCLOSEorother:doormovesinnallimit
position OPEN
.2
Same as option .1
In addition, when activated during door movement: door stops
.3
Activationfromallpositions:doormovesinnallimitpositionOPEN