GFA DC 8010 - 4 Frequency inverter functions; 4.1 Increase;decrease output speed OPEN; 4.2 Increase;decrease output speed CLOSE; 4.3 Increase;decrease output speed CLOSE > 96 (2.44 m)

41
4.1 - 4.9 Frequency inverter functions
The following menu items are only visible and applicable if
the door drive unit is equipped with a GfA original operator
mounted frequency inverter.
Increasing / decreasing the output speed
Use this menu item to change the output speed of the door
drive unit equipped with a frequency inverter. With menu
item
4.3 you can additionally increase the closing output speed
from a height of 96“ (2.44m) onwards.
Todothis,youmustrstdenetheswitchingpositionforthe
higher output speed CLOSE with menu item
4.4.
The adjustable values
4.1 to 4.3 depend on the door drive unit.
YoucanndthevaluesinChapter„Technicaldata“inthe
installation instructions for the door drive unit.
4.1 Increase/decrease output speed OPEN
4.2 Increase/decreaseoutputspeedCLOSE
4.3 Increase/decreaseoutputspeedCLOSE>96“(2.44m)
4.4 SettingthereferencepositionforincreasedoutputspeedCLOSE
▪ Move to the desired door position using the OPEN orCLOSEbutton. The
position must be at a height at least 96“ (2.44m).
▪ Save the door position by pressing the STOP button once.