GFA DC 8010 - 4.5 Increase; decrease acceleration OPEN; 4.6 Increase; decrease acceleration CLOSE; 4.7 Increase;decrease brake deceleration OPEN; 4.8 Increase;decrease brake deceleration CLOSE

42
AccelerationtooutputspeedOPEN/CLOSE
With menu items
4.5 and 4.6, you increase/decrease the time
in steps required by the door drive unit for accelerating to the
speciedoutputspeed
4.1 - 4.3.
4.5 Increase / decrease acceleration OPEN
4.6 Increase/decreaseaccelerationCLOSE
0 .0
No change
0.5 - 3.0
0.5 = Highest acceleration 3.0 = Lowest acceleration
Braking
With menu items 4.7 and 4.8 , you increase/decrease the
time in steps required by the door drive unit for slowing to
thespeciedcrawlingspeed
4.9 .
4.7 Increase/decrease brake deceleration OPEN
4.8 Increase/decreasebrakedecelerationCLOSE
0 .0
No change.
0.5 - 3.0
0.5 = Highest brake deceleration 3.0 = Lowest
brake deceleration
With menu item
4.9 , you increase/decrease the crawling speed
in steps. The door drive unit moves at the crawling speed
shortlybeforereachingthenallimitpositiontoprecisely
approachthecut-o󰀨pointofthenallimitposition.
4.9 Increasing/decreasingcrawlingspeedOPENandCLOSE
0 .0
No change.
0.5 - 3.0
0.5 = Highest crawling speed 3.0 = Lowest crawling speed