Program Examples
Publication 21555, Rev. E, September 2002 A-25
610 !
620 FOR I=1 TO 10
630 WAIT .01 ! For handshaking compensation. If necessary, use wait
640 !
650 !
660 OUTPUT @Pwr_mtr;TRIG ! TRIG is the SCPI Bus trigger. Can also use *TRG
670 WAIT .01 ! For handshaking compensation. If necessary, use wait
680 OUTPUT @Pwr_mtr;FETC1? ! FETC#? acquires data
690 ENTER @Pwr_mtr;Chan1sens_1(*)
700 !ENTER @Pwr_mtr;Chan1sens_1(*),Chan2sens_2(*)
! Use this line when two sensors are attached.
710 PRINT Chan1sens_1(*)
720 !PRINT Chan1sens_1(*),Chan2sens_2(*)! Use this line when two sensors are attached.
730 PRINT “”
740 NEXT I
750 !
760 END
To Next Page
