To Next PageTo Next Page
Need help?Do you have a question about the Giga-tronics 8003 and is the answer not in the manual?
General| Frequency Range | 10 MHz to 20 GHz |
|---|---|
| Resolution | 1 Hz |
| Amplitude Accuracy | ±0.5 dB |
| Output Power | +13 dBm |
| Power Resolution | 0.01 dB |
| Power Accuracy | ±0.5 dB |
| Non-Harmonic Spurious | -60 dBc |
| Interface | GPIB |
Concise overview of the 8003 Precision Scalar Analyzer's measurement capabilities.
Lists the key functionalities and capabilities of the 8003 analyzer.
Essential safety guidelines for installing and operating the 8003 analyzer.
Details the electrical specifications and fuse requirements for the instrument.
Outlines the frequency range, power range, and dynamic range of the system.
Describes the CRT, display resolution, and channel capabilities.
Details accuracy specifications for measurements like transmission and reflection.
Describes the physical controls and connectors on the instrument.
Explains the functions of the softkeys and menu structure.
Details how to configure and manage measurement channels.
Explains the primary function keys for measurement setup.
Covers controlling the signal source for measurements.
Describes instrument-wide configuration settings.
Provides procedures for calibrating sensors and bridges.
Explains how to perform these specific measurements.
Details how to perform accurate power measurements.
Covers connecting and configuring the instrument for remote control.
Explains the command structure for GPIB programming.
Details how commands are parsed and executed.
Outlines steps to verify the calibrator's output.
Describes how to test the linearity of the instrument and sensors.
Verifies the functionality of the RS-232 serial port.
Confirms the proper operation of the GPIB port.
Provides an overview of Giga-tronics power sensors.
Guides the user in selecting appropriate power sensors.
Details system connections and components.
Instructions for connecting power sensors.
Information on connecting compatible sweepers.
Instructions for connecting printers for hardcopies.
