58452 VXIbus Universal Power Meter
1-2 Publication 21555, Rev. E, September 2002
1.1.1 Items Furnished
In addition to options and/or accessories specifically ordered, items furnished with the instrument are as
follows:
• Operation & Maintenance Manual (P/N 21555)
• Two sets of power sensor cables
1.1.2 Items Required
A VXI mainframe which meets the power and cooling requirements of the modules is required. Two
sensor cables are furnished with the 58542 to fit the dual-channel female output connectors.
1.1.3 Tools & Test Equipment
Test equipment required for calibration and testing is described in Chapter 4 of this publication.
1.1.4 Storage
Giga-tronics VXIbus modules should be stored in an environment free from excessive dust and dirt and
in the temperature range of -40 °C to +70 °C.
1.1.5 Cooling
No special cooling is required. If the module is to be operated outside of a properly ventilated VXI
frame, auxiliary air circulation is required, such as a small fan directed at the module.
1.1.6 Receiving Inspection
Use care in removing the instrument from the carton and check immediately for physical damage, such
as bent or broken connectors on the front and rear panels, dents or scratches on the panels, broken
extractor handles, etc. Check the shipping carton for evidence of physical damage and immediately
report any damage to the shipping carrier.
Each Giga-tronics instrument must pass rigorous inspections and tests prior to shipment. Upon receipt,
the instrument’s performance should be promptly checked to ensure that operation has not been
impaired during shipment.
To Next Page
Loading...
