EasyManua.ls Logo

Giga-tronics 58542 - Peak Power Sensors

Default Icon
252 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58542 VXIbus Universal Power Meter
B-6 Publication 21555, Rev. E, September 2002
be measured as if the power meter were in MAP mode. In addition, some measurement inaccuracy will
result if the instantaneous power within the pulse falls below -43 dBm; however, this condition will not
cause LED to flash.
B.2.3 Peak Power Sensors
Notes:
1. The K connector is electrically and mechanically compatible with the APC-3.5 and SMA connectors.
2. Power coefficient equals <0.01 dB/Watt (AVG).
3. Power coefficient equals <0.015 dB/Watt (AVG).
4. For frequencies above 8 GHz, add power linearity to system linearity.
5. Peak operating range above CW maximum range is limited to <10% duty cycle.
Table B-3: 8035XA Peak Power Sensor Selection Guide
Peak Power Sensors
Model Freq. Range/
Power Range
Max.
Power
Power Linearity
4
RF
Conn.
Dimensions Wgt. VSWR
Length Dia.
Standard Peak Power Sensors
80350A 45MHz to 18GHz
-20 to +20dBm, Peak
-30 to +20dBm, CW
+23dBm
(200 mW)
CW or Peak
-30 to -20dBm ±0.00dB
-20 to +20dBm ±0.05dB/10dB
Type N(m)
50
165 mm
(6.5 in)
37 mm
1.25 in)
0.3 kg
(0.7 lb)
1.12:0.045 - 2GHz
1.22:2 - 12.4GHz
1.37:12.4 -18GHz
80353A 45MHz to 26.5GHz
-20 to +20dBm, Peak
-30 to +20dBm, CW
-30 to -20dBm ±0.00dB
-20 to +20dBm ±0.1dB/10dB
Type K(m)
1
50
1.12:0.045 - 2GHz
1.22:2 - 12.4GHz
1.37:12.4 -18GHz
1.50:18 - 26.5 GHz
80354A 45MHz to 40GHz
-20 to +0.0dBm, Peak
-30 to +0.0dBm, CW
-30 to -20dBm ±0.00dB
-20 to 0.0dBm ±0.2dB/10dB
1.12:0.045 - 2GHz
1.22:2 - 12.4GHz
1.37:12.4 -18GHz
1.50:18 - 26.5 GHz
1.92:26.5 - 40 GHz
5W Peak Power Sensor
2,5
80351A 45MHz to 18GHz
0.0 to +40dBm, Peak
-10 to +37dBm, CW
CW: +37dBm
(5W Avg.)
Peak: +43dBm
-10 to +0dBm ±0.00dB
+0 to +40dBm ±0.05dB/10dB
Type N(m)
50
200 mm
(7.9 in)
37 mm
(1.25 in)
0.3 kg
(0.7 lb)
1.15:0.045 - 4GHz
1.25:4 - 12.4GHz
1.35:12.4 -18GHz
25W Peak Power Sensor
3,5
80352A 45MHz to 18GHz
+10 to +50dBm, Peak
0.0 to +44dBm, CW
CW: +44dBm
(25W Avg.)
Peak: +53dBm
0.0 to +10dBm ±0.00 dB
+10 to +50dBm ±0.05dB/10dB
Type N(m)
50
280 mm
(11.0 in)
104 mm
(4.1 in)
0.3 kg
(0.7 lb)
1.20:0.045 - 6GHz
1.30:6 - 12.4GHz
1.40:12.4 -18GHz
50W Peak Power Sensor
3,
5
80355A 45MHz to 18GHz
+10 to +50dBm, Peak
0.0 to +47dBm, CW
CW: +47dBm
(50W Avg.)
Peak: +53dBm
0.0 to +10dBm ±0.00dB
+10 to +50dBm ±0.05dB/10dB
Type N(m)
50
280 mm
(11.0 in)
104 mm
(4.1 in)
0.3 kg
(0.7 lb)
1.25:0.045 - 6GHz
1.35:6 - 12.4GHz
1.45:12.4 -18GHz

Table of Contents