Program Examples
Publication 21555, Rev. E, September 2002 A-27
400 !
410 !
420 FOR I=1 TO 10
430 !WAIT 2 ! If necessary, use wait
440
450 OUTPUT @Pwr_mtr;FETC1? ! FETC#? acquires data
460 ENTER @Pwr_mtr;Chan1sens_1(*)
470 !ENTER @Pwr_mtr;Chan1sens_1(*),Chan2sens_2(*)
! Use this line when two sensors are attached.
480 !
490 PRINT Chan1sens_1(*)
500 !PRINT Chan1sens_1(*),Chan2sens_2(*) ! Use this line when two sensors are attached.
510 PRINT “”
520 NEXT I
530 !
540 END
The fastest SWIFt Mode measurement speeds are achieved with TRIG:SOUR:IMM and TRIG:COUN
set to values larger than about 25. See High Speed Measurements in Section A.8 for additional
information and examples.
The fastest BURSt Mode measurement speeds are achieved with TRIG:COUN at about 80 and
TRIG:DEL 0. See High Speed Measurements in Section for additional information and examples.
To Next Page
Loading...
