58542 VXIbus Universal Power Meter
2-48 Publication 21555, Rev. E, September 2002
OUTP:ANAlog
Syntax:
OUTPut[:BNC]:ANAlog[:STATe]space<ON | OFF>
Example:
OUTPUT @PWR_MTR;OUTP:ANA ON ! ENABLES ANALOG OUT FUNCTION
Description:
This command activates and deactivates the analog output. The analog output will not
operate unless this control is set to ON.
Syntax:
OUTPut[:BNC]:ANAlog[:STATe]?
Example:
OUTPUT @PWR_MTR;OUTP:ANA? ! QUERIES ANALOG OUT FUNCTION STATUS
Response:
1 for ON or 0 for OFF.
Description:
This query reports the ON or OFF status of the analog output.
To Next Page
Loading...
