GILBARCO VEEDER-ROOT FlexPay IV Insite360 Encore User Manual

Omnia Setup with Wizard - New Configuration Omnia PCB
MDE-5369E FlexPay™ IV (with Omnia) Programming and Service Manual · April 2020 Page 5-15
11 Click Next. The time configuration page opens.
Figure 5-19: Time Configuration
12 Set the proper Date And Time and Timezone. 
For more information, refer to “Set Date And Time” on page 5-40.
13 Click Next. The Select Authentication Mode page opens if Omnia is running 03.02 version or
higher.
Figure 5-20: Authentication Mode Page
14 Select No Authentication unless the customer requests a different mode. In the latter case,
refer to “Advanced Settings” on page 5-38

GILBARCO VEEDER-ROOT FlexPay IV Insite360 Encore Specifications

General

Brand	GILBARCO VEEDER-ROOT
Model	FlexPay IV Insite360 Encore
Category	Petrol Station Equipment
Language	English