30
INSTALLATION | 333/334 HPLC PUMPS
HYDRAULIC CONNECTIONS
Drip Tray
A removable drip tray fitted to the pump is supplied.
The drip tray slots into the well at the bottom of the pump. Installation consists of lifting up the
tray, fitting one end with a length of tubing. The other end of the tubing goes to the drain (or
a suitable receptacle) via the drain tubing exit port. Installation is completed by replacing the
drip tray.
Figure 23
Drip Tray Diagram
Solvent Bottle Tray
The solvent bottle tray sits on top of the pump with its feet resting in the special recesses.
v
Figure 24
Solvent Bottle Tray installed on 333 HPLC Pump (Left) and 334 HPLC Pump (Right)
Solvent
bottle
tray
Solvent
bottle
tray
To Next Page
Loading...
