Giorik Steambox Evolution SETE101 - CHECKS THAT CAN ONLY BE PERFORMED BY AN AUTHORIZED TECHNICIAN; RESET THE SAFETY THERMOSTAT

53
at least once a year or even more frequently whenever the oven operates in
environmentsinwhichthereisahighconcentrationofoursorsimilarsubstances.
Inallcases,theltermustbereplacedwhenitisconsumedordamaged;
it must be requested from the supplier as a spare part�
5. CHECKS THAT CAN ONLY BE PERFORMED BY
AN AUTHORIZED TECHNICIAN
Cut off the power supply before proceeding with any adjustment
or intervention.
5.1 RESET THE SAFETY THERMOSTAT
Loosenthescrewsthatxthecontrolpaneland
open it, making it rotate to the left on its guides�
Locate the thermostat, positioned in the lower
left side of the technical compartment and
press the red button until a mechanical sound
("click")isheard,whichwillconrmtheclosure
of the contacts (g. 23)� The thermostat can be
triggered due to mechanical stresses to which
the oven can be subjected during transport�
Continuous intervention of the safety
thermostat indicates a malfunction of the device
and makes it essential to investigate the causes�
5.2 MOTOR CIRCUIT BREAKER PROTECTION
The motor circuit breaker is reset automatically and, if this occurs,
check the cleanliness of the slits,the efciencyof thecooling devices
and the regular and friction-free rotation of the motor�
It is recommended to cut off the power supply�
5.3 PROTECTION FUSES
The protection fuses are used to protect the circuit boards of the oven
against overvoltage� These are found in the bottom part of the technical
compartment, near to the safety thermostat rearm button�
5.4 FLAME CONTROL
Caution:
Theamecontrolonlyfunctionscorrectlyiftheovenelectricconnection
has been performed respecting the position of the phase and neutral�
Between phase and there must be a difference in potential of 230V�
Fig. 23