Accessories, Consumables and Spares
Appendix C: Accessories, Consumables, and Spares
C.1 Inlet liners (or check Appendix F for a more complete list)
Fritted Liner, frit 15 mm
Liner for Splitless Injections
Baffled Liner for Splitless Injections
Fritted Liner (20 mm) with Single Taper
Fritted Liner Packed with Chromosorb W
Sintered Glass Liner with Taper
Ultra Low Bleed Septum, ULB-S-11, 11 mm, pk/25
Non-stick Plasma Treated O-ring, Viton, pk/10
OPTIC Graphite Ferrule for 0.53 mm ID Column, pk/10
OPTIC Graphite Ferrule for 0.32 mm ID Column, pk/10
OPTIC Inlet Metal Ferrule, Column ID 0.25mm, pk/10
OPTIC Inlet Metal Ferrule, Column ID 0.32mm, pk/10
OPTIC Inlet Metal Ferrule, Column ID 0.53mm, pk/10
OPTIC Graphite Ferrule, no-hole, pk/10
OPTIC Stainless Steel Inlet Bottom Nut, pk/5
OPTIC Key Inlet Bottom Nut
OPTIC Inlet Bottom Nut for Metal Ferrule, pk/5
OPTIC-4 Inlet Septum Nut Standard
OPTIC-4 Inlet Top Boss Clamp Nut
OPTIC-4 Inlet Clamp Nut Insulator
OPTIC-4 Inlet Septum Nut, Shimadzu type
OPTIC-4 Inlet Septum Nut Insert, Shimadzu type
OPTIC-4 Solvent Monitor Assembly
OPTIC-4 Inlet Cooling Valve
OPTIC-4 EFC Fitting, 1/8" tubing
Aluminum Seal Type-G, pk/10
Fuse, Slow Blow, 250V, 6.3A
Suggested
replacement
period 3
years
OPTIC Inlet Bottom Insulation Cap
To Next Page
Loading...