GL Sciences OPTIC-4 - D.5 Expert method

OPTIC-4 User’s Guide
Issue 5.3
Method Profiles
Page D-5
D.5 Expert method
Injector
Temperature
Equilibration Time
Initial Temperature
Start CF 2
End CF 1
End CF 3
ISO Temp 1
Ramp Rate 1
Column Flow
Parameters stable Run In End Run
Time (min:sec)
End Time
Split Flow
Initial Split Flow
Split Flow 4
Split
Splitless
Run Out
Sample Sweep CF
Vent Time
Time 1
Start CF 1
ISO Time 1
ISO Time 2
ISO Temp 2
ISO Time 3
ISO Time 4
ISO Temp 3
ISO Temp 4
End CF 2
Start CF 3
Start CF 4
End CF 4
Ramp Rate 2
Ramp Rate 3
Ramp Rate 4
Start AF/AP 2
End AF/AP 1
End AF/AP 3
Time 1
Start AF/AP 1
End AF/AP 2
Start AF/AP 3
Start AF/AP 4
End AF/AP 4
Time 1
Time 2
Time 3
Time 4, etc
Auxiliary Outputs
(1 - 7)
Open
Closed
Split Flow 1
Split Flow 2
Split Flow 3
Time 1
Auxiliary Flow/
Pressure
Instrument
Status
Delay Time