GL Sciences OPTIC-4 - Page 116

OPTIC-4 User’s Guide
Issue 5.3
Liner Selection Guide
Page F-5
LINEX-Thermal Desorption Liners
Fritted Liner with Single Taper and Frit at 20 mm, p/no 2414-1011
This liner contains a medium porosity frit made from sintered deactivated glass. It can be used
for the LINEX direct (in-inlet) thermal desorption of all kind of solid samples. If packed with a
suitable packing material, the liner can be used for thermal desorption of gaseous samples. If
packed, a bed depth of up to 25 mm can be employed and retained in place with a plug of
deactivated glass or quartz wool. Pack size: 5 pieces
Fritted Liner packed with Tenax GR, mesh 80-100, pk/5, p/no 2414-1021
Fritted Liner packed with Tenax GR, mesh 60-80, pk/5, p/no 2414-1022
Fritted Liner packed with Carbosieve , pk/5, p/no 2414-1023
Fritted Liner packed with Tenax GR and Carboxen, pk/5, p/no 2414-1024
Fritted Liner packed with Tenax TA and Carboxen, pk/5, p/no 2414-1025
Fritted Liner packed with Carbotrap, pk/5, p/no 2414-1026
Fritted Liner packed with Tenax TA, mesh 60-80, pk/5, p/no 2414-1027
Pack size: 5 pieces.