GME TX6600PRO - SelCall System

TX6600PRO INSTRUCTION MANUAL
49
5. Rotate the Channel knob or press the keys to edit the desired
character in the ashing position.
6. Press
MENU
F
to advance to the next character position.
7. Repeat steps 5 & 6 as necessary to edit the eld, then hold
MENU
F
to
save. The eld will ash 3 times to conrm it has been saved.
8. If required, briey press
MENU
F
to toggle between Ident and Alpha
modes, then repeat steps 5 & 6 to edit the eld.
9. When complete, hold
MENU
F
to save. The eld will ash 3 times to
conrm it has been saved.
10. Press
CALL
LOCK
to return to the CALL sub-menu.
11. Press
CALL
LOCK
again to return to normal operation.
Sending a SelCall from your contact list
1. Press
CALL
LOCK
to enter the CALL Menu.
2. Rotate the Channel knob or press the keys to cycle to the
SAVED option then press
MENU
F
to select.
3. press the keys to cycle to the desired SelCall ID in your contact
list.
4. With the desired contact displayed, hold the
CALL
LOCK
key. The radio will
transmit the SelCall Ident.
Sending a SelCall from your Recent List
The Recent List contains a list of recently received SelCalls. You can use this list to
return a call or simply view who has called you.
1. Press
CALL
LOCK
to enter the CALL Menu.
2. Rotate the Channel knob or press the keys to the RECNT
option then press
MENU
F
to select.
3. Press to cycle through the Recent List.
4. While viewing recent callers, press
MENU
F
to switch between Ident
mode and Alpha mode. If the selected caller is in your contact list, the
Alpha Name should be viewable. If the caller is not in your contacts,
only the Ident will be displayed.
5. To respond to the caller, hold the
CALL
LOCK
key. The radio will transmit the
selected SelCall.