GME TX6600PRO - Page 76

TX6600PRO INSTRUCTION MANUAL
72
Audio Amplier Test: (Maintenance option for testing the receiver audio power
amplier)
1. Press the programmed Audio Amplier Test key to generate a
1000Hz tone in the speaker.
2. Rotate the Channel knob or press the keys to change the tone
frequency in 100Hz steps.
3. Press the programmed Audio Amplier Test key again to stop the
test.
Power Saving Cycle
Press the programmed Power Saving key to cycle OFF, LO or HI.
• Select OFF to switch the Power Save function O. The radio will
remain active at all times and will draw the most amount of power
from the battery.
• Select LO to enable the Power Save function at a conservative setting.
The radio will sleep during periods of inactivity but will respond
quickly to incoming signals.
• Select HI to enable the Power Save function at a more aggressive
setting. The radio will conserve the most amount of power but may
not be as responsive to incoming signals.
Power Saving Menu
1. Press the programmed Power Saving Menu key to access the Power
Saving menu.
2. Rotate the Channel knob or press the keys to select OFF, LO
or HI.
• Select OFF to switch the Power Save function O. The radio
will remain active at all times and will draw the most amount of
power from the battery.
• Select LO to enable the Power Save function at a conservative
setting. The radio will sleep during periods of inactivity but will
respond quickly to incoming signals.
• Select HI to enable the Power Save function at a more
aggressive setting. The radio will conserve the most amount of
power but may not be as responsive to incoming signals.
3. Press the
MENU
F
key to exit or wait a few seconds for the menu to time-
out.