85
Programming fields:
Continued from previous page
3
Field “3”: Deleting user pins.
Press “3” to select field “3”.
Steps: Field + memory position +key button +key button.
4 C
or
( 1)Step
( 4)Step
Set the existing memory position number to select for deletion.
Note: Possible memory positions: “001” to “999”.
Enter an existing memory position to be deleted.
If the value “000” is entered, .all memory positions will be deleted
Allows the deletion of existing user pins.
Note: Possible memory positions: “001” to “999”.
( 3)Step
Then press the number of the next field to configure or press the C button (cancel) to exit
programming mode.
3
0
0 1
( 2)Step
0 1
0
Press the key button twice to confirm the deletion and to finish programming the field.
AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED DOOR PANEL
PROGRAMMING THE DOOR PANEL
To Next Page
Loading...
