golmar Nexa - Page 90

90
Programming fields:
Continued from previous page
Field “9”: Configuring the keypad beep.
9
Press the key button to finish programming the field.
0 1
or
9
Press “9” to select field “9”.
0 1
Steps: Field + keypad beep + key button.
or
C
( 1)Step
( 2)Step
( 3)Step
( 4)Step
Allows a beep to be heard when pressing the access control module's keypad buttons.
Enter one of the following options:
"0" : No keypad beep.
"1" : Keypad beep.
Allows a beep to be heard when pressing the access control module's keypad buttons.
Then press the C button (cancel) to exit programming mode.
AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED DOOR PANEL
PROGRAMMING THE DOOR PANEL