Select the corresponding safety code based on the country or region
where the equipment is located.
Select the actual mode for connecting the battery to the inverter. If there is
no battery connected in the system, it is unnecessary to configure the
battery model and working mode, and the equipment will operate in the
self-use mode by default.
Select the battery type and model based on actual situation.
Set the working mode of the device during operation. Supports: Self-use
mode and back-up mode.
When the self-use mode is selected, the interface will be displayed as follows. You need to enter
the advanced mode to choose the specific working mode and set the corresponding parameter
values.
To Next Page
Loading...
