Goodwe GW10K-ES-C10 - Page 147

147
limit
generator.
8
Lower Frequency
Set the lower limit of the generator's operating frequency.
9
Preheating time
The no-load preheating time before the generator is
loaded.
10
Switch
Turn on or off the function of the generator to charge the
battery.
11
Maximum charging
power
Set the maximum charge power for the generator battery.
12
starting voltage
Set the start voltage for generator to charge battery.
When the voltage of the battery is lower than the set
value, the generator will charge the battery.
13
stop voltage
Set the stop voltage for generator to charge battery.
When the voltage of the battery is higher than the set
value, the generator will stop charging the battery.
Method II: Setting via LCD
Step 1: Click on the screen or select the settings icon > System Setup > Generator
Control through the button to enter the settings page.
Step 2: Set up the function according to actual needs.