Goodwe GW10K-ES-C10 - Page 148

148
Number
Parameter
Description
1
Generator ON/OFF
Controls the start and stop of the generator. Only
applicable to generators that support dry contact.
2
Rated power
Rated power of the generator.
3
Run time
The duration of continuous operation of a generator.
When the working time exceeds the set value, the
generator will automatically shut down. This feature only
applies to generators that support dry contact
connection.
4
Max Charging Power
Set the maximum charge power for the generator battery.
5
SOC for Starting
Charging
Set the starting SOC for the generator to charge the
battery. When the SOC of the battery is lower than the set
value, the generator will charge the battery.
6
SOC for Stopping
Charging
Set the stopping SOC for the generator stopping
charging the battery. When the SOC of the battery
reaches the set value, the generator will stop charging the
battery.