Goodwe GW10K-ES-C10 - Page 155

155
6
OF Stage n Trip Value
Set the grid overfrequency protection threshold
value, n = 1, 2.
7
OF Stage n Trip Time
Set the grid overfrequency protection tripping time,
n = 1, 2.
8
UF Stage n Trip Value
Set the grid underfrequency protection threshold
value, n = 1, 2.
9
UF Stage n Trip Time
Set the grid underfrequency protection tripping
time, n = 1, 2.
Setting Connection Parameters
Step 1: Tap Home > Settings > Advanced Settings > Safety Parameters > Protection
Parameters to set the parameters.
Step 2: Set the parameters based on actual needs.
Setting Voltage Ride through Parameters
Step 1: Enter the parameter setting page through Home > Settings > Advanced
Settings > Safety Parameter Settings > Voltage Fault Ride-Through.
Step 2: Set the parameters based on actual needs.