AC input and output cables of
inverter (BACKUP/GRID):
Cross sectional area of
conductor: 16mm² or 4AWG
Outer diameter of multi-core
outdoor copper cable: 23.3mm-
24.8mm
Outer diameter of single-core
outdoor copper cable: 9.5mm-
9.9mm
Generator power cable (GEN):
Cross sectional area of
conductor: 10mm² or 6AWG
Multi-core outdoor copper
cable outer diameter: 20mm-
21mm
Outer diameter of single-core
outdoor copper cable: 8.3mm-
8.7mm
Communication between batteries and
inverters as well as between batteries
requires the use of CAT 5E or above
standard shielded network cables and
RJ45 shielded connector.