Grandstream Networks WP810 - Configuring the LCD Brightness and Screen Timeout; Table 10: WP810 Network Status Description; Figure 17: WP810 Network Status

P a g e | 42
WP810 User Guide
Version 1.0.1.1
Figure 17: WP810 Network Status
The following information will be displayed:
Table 10: WP810 Network Status Description
Setting
Description
Network SSID
Displays the SSID Name on which the handset is connected.
BSSID
Displays the MAC address of the Access Point on which the handset is
connected.
IPv4 Address
Displays the IP address of the handset.
IPv6 Address 1
Displays the IPv6 address.
Signal strength
Displays the Wi-Fi signal strength.
Connections Speed
Displays the link speed (Mbps)
Channel
Displays the channel used.
Frequency
Displays the channel frequency.
Other Information
Tx/Rx Packets, Tx/Rx Error Packets, Tx/Rx Error Rate, Tx/Rx Drop
Packets and Tx/Rx Drop Rate.
Configuring the LCD Brightness and Screen Timeout
1. Press Menu to bring up operation menu.
2. Use arrow keys to reach Settings.
3. Navigate to Basic Settings, and then select Display.
4. Configures the LCD brightness, key backlight, lock screen, screen time out and the font size.
5. Press “Back” (right softkey) to save and apply the new settings.