Grandstream Networks WP810 - Using PTT and Group Paging

P a g e | 71
WP810 User Guide
Version 1.0.1.1
Using the PTT Functionality on the WP810
To send a PTT broadcast from your WP810:
1. Unlock your WP810.
2. Make sure the multi-function button is configured to be a Push-To-Talk button.
3. Press the Push to Talk soft key.
4. Press and hold the Push to Talk key while speaking.
Figure 50 : Custom Button set to PTT/Paging
Figure 51: PPT Channel
Notes:
• Users could press and hold the Push-to-talk key from any screen to quickly initiate PTT call using
default channel.
• The channel status will change to Sending PTT to indicate that you are transmitting as displayed
on the following screenshot.