2. Use arrow keys to reach Settings → Call Settings → Call forward.
3. Select which account will be enabling the call forwarding feature and navigate to “Call forwarding”.
4. Set “Call Forward” to “On” and select the call forwarding mode.
5. Configure the parameters of the call forward mode and press “Save” button.
Figure 32: Call Forwarding
• Unconditional: All the incoming calls will be forwarded to the number set up in "All To" field.
• Time Based: All the incoming calls will be forwarded to the number as schedule in the time period.
During the setup time, the call will be forwarded to the number in "In Time Forward To:" field. Other
period the call will be forwarded to the number in "Out Time Forward To:" field.
• Others: The incoming call will be forwarded when the WP810 is busy or no answer after certain
interval "Delayed Call Forward Wait Time (s)" or if the phone is set to DND mode.
Note: The call forwarding can be also configured from the WP810 Web GUI → Accounts → Feature codes.
To Next Page
Loading...
Need help?
General
